Heating Dry Bath
thermostatic Dry Baths DH-200 It adopts microcomputer control and uses high-purity aluminum material as the heat-conducting medium to replace the traditional water bath device. It has the characteristics of convenient use, large temperature control range and high precision. It can be widely used in sample preservation and reaction, DNA amplification and electrophoresis pre-denaturation, serum coagulation and other biochemical sample constant temperature incubation processes.
- Description
- Specifications
- Paper
- Video
thermostatic Dry Baths DH-200 It adopts microcomputer control and uses high-purity aluminum material as the heat-conducting medium to replace the traditional water bath device. It has the characteristics of convenient use, large temperature control range and high precision. It can be widely used in sample preservation and reaction, DNA amplification and electrophoresis pre-denaturation, serum coagulation and other biochemical sample constant temperature incubation processes.
1. Simple and easy-to-use man-machine interface, real-time display of all running information and setting information, which is convenient for users to observe the running status of the equipment.
2. Large capacity, take a 1.5ml centrifuge tube as an example, the capacity of DH-200 can hold 96 bits at the same time.
3. The blue transparent cover can effectively prevent the sample from sputtering and bursting.
4. The constant temperature module is divided into four areas: A, B, C, and D, and each area can be independently timed. It is convenient for samples placed in different time periods to be incubated at a constant temperature, and has an indicator light.
5. The module configuration is flexible, 4 modules of different specifications can be selected to be used at the same time, and can also be customized according to customer requirements.
6. Intelligent settings: automatic preheating, automatic operation at startup, automatic recovery after power failure, etc., which are not available in many large-capacity metal baths.
7. Rapid heating, the equipment can complete 25 degrees to 100 degrees in 15 minutes.
8. High precision, when the equipment is at a constant temperature of 37 degrees, the standard module is calibrated, and the accuracy can be controlled within 0.2 degrees.
9. The instrument has its own temperature calibration function.
10. Built-in software and hardware double over-temperature protection device, more reliable to use.
Model | DH-200 |
Temperature setting range | 0℃~110℃ |
Temperature control range | Room temperature+5℃~110℃ |
Time Range | 1-99h59min/∞ |
Temperature control accuracy | ≤±0.3℃(@37℃) |
Display accuracy | 0.1℃ |
Heating time | ≤15min (25℃~100℃) |
temperature uniformity | ≤±0.2℃(@37℃) |
Auto warm up | support |
Partition independent timing function | support |
Auto run at boot | support |
Automatic recovery after power failure | support |
Number of modules | 2~4 |
voltage | AC110 or 220V/50-60HZ |
Maximum power | 500W |
Product size | 370*254*178mm |
Product weight | 8.0kg |
Module model selection | |||
Model | Tube diameter | Number of test tubes | Module size |
DT01 | 6mm | 48 | 95.5×76.5×50 |
DT02 | 7mm | 48 | 95.5×76.5×50 |
DT03 | 10mm | 24 | 95.5×76.5×50 |
DT04 | 12mm | 24 | 95.5×76.5×50 |
DT05 | 13mm | 24 | 95.5×76.5×50 |
DT06 | 15mm | 16 | 95.5×76.5×50 |
DT07 | 16mm | 12 | 95.5×76.5×50 |
DT08 | 19mm | 12 | 95.5×76.5×50 |
DT09 | 20mm | 12 | 95.5×76.5×50 |
DT10 | 26mm | 8 | 95.5×76.5×50 |
DT11 | 28mm | 4 | 95.5×76.5×50 |
DT12 | 40mm | 3 | 95.5×76.5×50 |
DT13 | 0.5ml centrifuge tube | 42 | 95.5×76.5×50 |
DT14 | 1.5ml centrifuge tube | twenty four | 95.5×76.5×50 |
DT15 | 2.0ml centrifuge tube | twenty four | 95.5×76.5×50 |
DT16 | 0.2ml centrifuge tube | 48 | 95.5×76.5×50 |
DT17 | 0.2ml 8 strips | 96-well standard plate | 81×123×19 |
DT18 | 0.2ml plate | 96-well microtiter plate | 81×123×19 |
DT19 | Other specifications can be customized | ||
Note: DT17 and DT18 modules are two modules combined into one. For example, DH-200 can only hold two DT17s. |
host | 1 set |
module | 2-4 piece |
power cable | 1 root |
Special screwdriver (for removing the module) | 1 set |
user's manual | 1 part |
certificate | 1 part |
Warranty Card | 1 part |