News

Due to the friction and wear of the material on the screen, it is necessary to choose wear-resistant and corrosion-resistant materials as the screen material to extend the screen area; users should pay more attention during operation and use, and operate in strict accordance with the operating regulations to avoid unintended consequences. Necessary wear, so as not to affect the service life of the screen and the production efficiency of the vibrating screen.

1. If the screen material of the vibrating screen machine is not good and the mesh cloth is poor, it will not meet the requirements in use, and it is easy to wear and damage. It is recommended that you choose a vibrating screen produced by a professional Xinxiang vibrating screen manufacturer when purchasing a vibrating screen. , choose a screen with reliable quality.

2. Regularly check the tensioning progress of the screen. If the screen and the screen frame are not tightly fitted, the tension of the screen is not good, which will easily cause the screen to tremble, resulting in cracking or damage along the edge of the screen or the edge of the bead.

3. If the screen is not evenly tensioned when installing the screen, it will cause uneven force on all sides, which may cause the screen to be damaged.

4. Too much feeding at one time will also cause the screen to be damaged too quickly. The main function of the screen is to be responsible for the screening of materials. During the screening process, we will continuously put materials into the vibrating screen. The processing capacity of the vibrating screen is certain, and the load it bears is also certain. A large amount of material causes the bearing capacity of the screen to be less than the weight of the material, which increases the load of the screen and causes damage to the screen.

5. The accumulation of clay on the screen will cause the vibration and fluctuation of the equipment to be too small, and it is difficult to screen under the condition of polymer drilling fluid, and the screen will be piled up and quickly damaged.

6. The wrong rotation of the vibrating screen motor will also cause damage to the screen. When debugging the steering of the vibrating motor, the on-site operators believed that as long as the drill cuttings moved forward based on the previous experience of using a single-axis vibrating screen or a linear screen, this method is not suitable for a translational elliptical vibrating screen.

7. Different vibrating screens should be selected for materials of different properties. If the screen mesh of the vibrating screen is not consistent with the properties of the materials to be screened, the wear of the vibrating screen will also be aggravated.

8. The screen generally has an upper screen layer and a lower force layer, which requires close contact between the two layers. If the pre-tensioning process of the screen is poor, when the force layer at the bottom of the screen is tight, the screen will be screened. The layer is not tensioned, and the distance between the upper and lower vibrations of the screen is too large when the screen machine is working, and the contact part with the screen frame cannot be effectively pressed, which is also one of the reasons for the rapid damage of the screen.

9. The operator should not use sharp or metal tools to shovel or smash the screen.