News

The screens and filters of the grinding machine have been filtered layer by layer for a long time. After use, the screens are usually blocked and more serious. Some stubborn blockages adhere to the meshes of the screen and affect the use. At this time, the general practice It is brushed with artificial brushes. The layers of fine bristles are brushed back and forth, which can clean most of the blocked pores. However, for some broken sand particles, it has little effect, and the adverse consequence of brushing is to directly destroy the screen. Not to mention the long service life and low cost, then the manufacturer uses an ultrasonic cleaning machine to clean the screen.

The advantages of ultrasonic cleaning screen are as follows:

1. Fast cleaning speed;

2. No need for manual labor, as long as it is put into the ultrasonic cleaning tank, the ultrasonic cleaning machine will be automatically cleaned when the power is turned on;

3. The screen will not be damaged or damaged, and the frequency is very important. The Kemeng ultrasonic cleaner is also equipped with a mesh basket. During operation, only the screen with serious blockage is placed on the shelf, and tap water is placed in the ultrasonic cleaning tank. When it reaches a certain height, turn on the power switch, and the effect of ultrasonic waves directly bombards the blocked mesh, and the fallen particles naturally settle under the mesh basket, and the drainage can be removed.