News

      If it is used as a high-pressure ultrasonic cleaner without sufficient water pressure, it is very scary, and the machine may not be useful at all. Therefore, when it is found that the water pressure of the high-pressure ultrasonic cleaning machine does not meet the corresponding standard, it is necessary to carefully investigate the cause and carry out scientific treatment to solve the problem as soon as possible.

     Usually the quality of high-pressure ultrasonic cleaners is very good, but there are some common problems encountered during use, one of which is that the water pressure does not meet the corresponding standards. At this time, we need to check the overflow valve of the high-pressure ultrasonic cleaner, and replace the accessories in time when it is found to be aging.

      Secondly, check whether the water inlet flow of the high-pressure ultrasonic cleaning machine is sufficient. If it is not sufficient, it needs to be processed so that the water inlet flow of the equipment reaches the corresponding standard, then the water outlet pressure of the high-pressure ultrasonic cleaning machine is also will meet the requirements.

     In addition, the water inlet filter of the high-pressure ultrasonic cleaning machine should also be checked clearly. As long as the air in the clean water inlet filter is exhausted, the water outlet pressure can reach the corresponding standard. Don't forget to check its high and low pressure water seals and water inlet and outlet check valves by the way, and observe whether there is any leakage.

     If there is any abnormality in these parts of the high-pressure ultrasonic cleaning machine, these parts need to be replaced in time to eliminate the problem, so that the equipment can be put into the cleaning work in good condition and achieve the ideal cleaning effect.