News

      Although almost everyone knows that the ultrasonic cleaning machine has a strong working ability, few users understand the measurement parameters of the equipment ability. In fact, this parameter index is the power, and the ultrasonic cleaning machine with high power will It is more conducive to the cleaning effect. However, it is not that the higher the power, the better the cleaning effect, but the correct and reasonable selection of ultrasonic power, so that the equipment can achieve the ideal cleaning effect.

      For ultrasonic cleaning machines, ultrasonic power is often used to measure its cleaning ability. If the power is increased on the original basis, the radius of the cavitation bubbles generated by the ultrasonic cleaning machine And the starting radius will become larger, resulting in increased cavitation strength, which is more beneficial to the cleaning effect.

      In the ultrasonic cleaning machine, the higher the power of the ultrasonic wave, the more obvious the cavitation effect, and at the same time, a large number of useless bubbles will be generated, which will increase the diffraction attenuation and form a sound barrier. Therefore, in the case of low frequency, the bubbles can grow to a larger size, enhance the cavitation strength, and facilitate the cleaning effect.

      In practical applications, low-frequency ultrasonic cleaning is generally used on the surface of large parts or where the adhesion of dirt and the surface of the workpiece is high; Clean parts with high surface finish requirements or complex surfaces and many blind holes; the noise of high-frequency ultrasonic waves is also small, and precision parts can also be cleaned with this type of ultrasonic cleaner.

      Regardless of the power of the ultrasonic cleaning machine, its dirt and other attachments should be cleaned regularly to keep the body and cylinder surface clean and free from moisture; at the same time, the grounding of the body and the insulation of the transducer should also be regularly checked Resistance value, when the insulation value is too low, consideration should be given to avoid the effect of unfavorable environmental factors, and take drying measures.

      In addition, it is necessary to open the upper cover of the ultrasonic generator regularly, and blow the dust from the circuit board with compressed air to prolong the service life of the host. Similar maintenance measures must be carried out by special personnel to avoid adverse effects on the ultrasonic cleaner.