Technical

    How to use the full temperature shaking incubator correctly? The correct use of the full temperature shaking incubator should do the following points:

1. When not in use for a long time, the power supply should be cut off, and it is strictly forbidden for any liquid to enter the machine to avoid damage to the host.

2. Do not put the case body in a corrosive environment containing acid and alkali, so as not to damage the electronic components.

3. When using it with power on, do not touch the electrical parts of the space on the left side of the box with your hands or wipe it with a damp cloth and rinse it with water.

4. When not necessary, do not open the temperature controller to prevent damage.

5. After each use, the power supply must be cut off. Always keep the inside and outside of the tank clean and the water in the tank clean.

6. When the temperature is high, be careful to be careful of burns.

7. The fuse tube is installed in the space on the left side of the box. When changing, the side door needs to be opened and the power supply must be cut off.

8. The power cord should not be wrapped around metal objects, and should not be placed in a high temperature or humid place to prevent the rubber from aging and causing leakage.

9. The test object should not be over-squeezed when placed in the box, so that the air can flow smoothly and keep the heating uniform in the box. The bottom plate of the inner chamber is close to the electric heater, so the test object should not be placed. In the laboratory, the wind roof valve should be properly opened to adjust the temperature in the box.

10. When valuable strains and cultures are placed in the incubator, they should be observed frequently. If an abnormal situation occurs, the power supply should be cut off immediately to avoid extraneous or unnecessary losses.

The above is about the correct use of the full-temperature shaking incubator analysis method, and I hope to provide help for everyone's use.